Australian DollarCanadian DollarDanish KroneEuroPound SterlingLatvian LatsNorwegian KroneZlotyRussian RubleSwedish KronaUS DollarRand

Select Currency:


DJI Phantom 2 - With optional Zenmuse H3-2D 2-axis gimbal

Brand: DJI
Condition: New
MPN: dji-phantom

Optional Zenmuse H3-2D 2-axis gimbal
More Information
DJI Phantom 2 RTF Quadcopter

The DJI Phantom 2 is an evolution of the Phantom. It comes completely ready to fly and supports FPV and Aerial Photography. The propellers are mounted, there are batteries in the transmitter and the battery for the Phantom 2 comes fully charged. This truly is RTF straight from the box. 

  • Built-in high capacity, intelligent 5200mAh batery for longer flight time - up to 25 minutes
  • H3-2D Zenmuse gimbal support - designed so fitting the Zenmuse H3-2D is straightforward and easy
  • Can-bus expansion module for funcation expansion - this can be used for an iOSD or 2.4G Datalink
  • Upgrading to FPV is easy - an AV output and video-downlink power cables are already installed
  • The intergrated Naza V2 and GPS offers position holding, altitude lock and stable hovering
  • Auto return to home and landing feature 
  • Intelligent orientation control means that 'forward' is always the direction the nose faced at takeoff and Home Lock mode makes 'forward' always where the Phantom 2 took off from. These settings can be adjusted to suit your needs.
  • An advanced power management system monitors power capacity and voltage. If the power drops below safe levels the Phantom 2 will land automatically. 
  • Easy battery replacement
  • Pre-balanced, self-tightening propellers enhance safety and reduce any jello effect.
The following table outlines the difference between the Phantom v1, the Phantom 2 and the Phantom 2 Vision. CLICK HERE

Optional Zenmuse H3-2D 2-axis GoPro3 brushless gimbal

The Zenmuse H3-2D 2-axis GoPro3 brushless gimbal is precise, stable, lightweight and plug and play. This model is ONLY for the Phantom 2.  FEATURES All aluminum alloy manufactured - making the gimbal extremely lightweight yet solid; Supports pitch and roll stabilization control; Brushless motor direct drive; Enhanced Vibration Dampening; Remote Tilt Control; Precision of control angle within the range of ±0.08 degrees; Simple installation process; no manual adjustment is needed; Designed specifically fo GoPro Hero 3 - future firmware upgrades will enable the gimbal to support all the features of the GoPro Hero 3; Brushless gimbals are more benefical than gimbals that use servos as there is no gears, no notchiness and therefore they produce a much smoother picture. Simple and easy installation on the Phantom 2 SPECIFICATIONS Built-in independent IMU module; Input power: 3S (12V) to 6S (26V); Gimbal weight: 230g Dimensions: 99.5mm x 85.5mm x 92.75mm (see picture) Maximum controlled rotation speed: Tilt axis - ±130°/s and Roll axis - ±30°/s Operating temperature: -10°C ~ 50°C Controlled rotation range: Tilt axis control: ?130~+50° and Roll axis control: ±39° Please read the following instructions on what to do/not do with the Zenmuse Gimbal. Failure to do so may result in a damaged or broken gimbal and invalidate the warranty.  

Looking for Spares? CLICK HERE
Customer Reviews